Update cs_pkcs11_R3.cfg | Utimaco Integration Guides

On Windows, as part of CryptoServer software installation, cs_pkcs11_R3.cfg will be automatically created and available under the “C:\ProgramData\Utimaco\PKCS11_R3” folder.

ActionScript

cs_pkcs11_R3.cfg

[Global]

# For windows:

Logpath = C:/ProgramData/Utimaco/PKCS11_R3

# Loglevel (0 = NONE; 1 = ERROR; 2 = WARNING; 3 = INFO; 4 = TRACE)

Logging = 1

# Prevents expiring session after inactivity of 15 minutes KeepAlive = true

# Set the Device to connect with [CryptoServer]

# Device specifier Device = <HSM_IP>

For more information regarding the commands and command parameters, please check the Utimaco CryptoServer documentation. The device may be a CryptoServer (PCIe or LAN) device. The device line will follow one of these patterns, based on the HSM form-factor:

Device = 288@<HSM IP address> Hardware (LAN) HSM OR

Device = /dev/cs2.0 Hardware (PCIe) HSM

To make your testing easier, enable the PKCS#11 log file. You can enable it by editing the Logging Loglevel. Set the LogPath and Logging Loglevel to 1. For testing, you may want to increase them to 4.

The added LogPath points to a writable directory, not to a file.

If you encounter problems, check the log file named cs_pkcs11_R3.log in the LogPath-defined directory. When you are done testing, change the Logging to 1 or 2. This will limit the logging to only critical and important messages.