Ensure the system environment you will be using meets the following hardware and software requirements.
Tested Versions
The integrations that have been successfully tested with the Utimaco HSM and Bind9.
|
Operating System |
Bind9 Version |
Utimaco Security Server Version |
Utimaco HSM |
|---|---|---|---|
|
RHEL 8 |
9.18.14 |
SecurityServer 4.51.0.1
|
CryptoServer CSe-Series/Se-Series |
|
RHEL9 |
9.18.14 |
Security server 4.51.0.1 |
CryptoServer CSe-Series/Se-Series u.trust Anchor Se*k and u.trust Anchor CSAR |
List of tested versions
Software Requirements
|
Software |
Software Requirements |
|---|---|
|
OpenSSL |
3.0.7 and 1.1.1k |
|
Libp11 |
0.4.12 |
|
HSM Utility |
PKCS#11 Tool Version 2 (p11tool2) |
|
HSM Interfaces |
SecurityServer PKCS#11 Provider |
List of software requirements
Hardware Requirements
|
Hardware |
Hardware Requirements |
|---|---|
|
Utimaco LAN HSM |
CryptoServer CSe-Series/Se-Series LAN with firmware SecurityServer
u.trust Anchor Se*k and u.trust Anchor CSAR with firmware 4.51.0.1 or higher |
|
Utimaco PCI-e HSM |
CryptoServer CSe-Series/Se-Series PCI-e with firmware SecurityServer
u.trust Anchor Se*k and u.trust Anchor CSAR with firmware 4.51.0.1 or higher |
List of hardware requirements
Set up an account on the Utimaco support portal and request download access at the following URL: https://support.hsm.utimaco.com/.
Prerequisites
Before you begin, please ensure that:
-
The operating system is listed in Tested Versions.
-
The CryptoServer HSM is listed in Tested Versions.
-
The HSM Default Admin is replaced with a new admin user.
-
The CryptoServer HSM is set up and configured. Refer to the CryptoServer HSM documentation to set up the HSM.
-
The admin access is set up as it is required to install the software.
-
You familiarize yourself with the Bind9 documents and setup process.
-
You allow port 53 through firewall.